Thrasher Foundation Repair Before & After Photos

Janet P. recently purchased her home and unfortunately discovered water problems with her basement. The problem was the north wall had stair-step cracking. Upon inspection, the Thrasher team found additional issues with the east wall. We stabilized the east wall with Carbon Armor and tackled the north wall problem with c-channel. We also waterproofed the entire basement and installed a Triple Safe Sump Pump.

Tristan H. recently bought a home and wanted to finish the basement to provide more bedrooms for his kids. They decided to call Thrasher because Eliza H. had lived in a home that had our wall support product already.

The wall they called about was a unique situation where most of the damage was 2' off of the ground so we had to install anchors with C-channels. Upon inspection, there was another wall that bowing in that we installed Power Braces on.

Theresa C. noticed sagging floors in her kitchen and hallway near the washer and dryer. The floors on the main level were starting to settle. She thought the solution would be to install new flooring, but a flooring specialist recommended better support was needed first. She decided to call us to have a look.

We had a System Design Specialist, Nicholas Hruska, go to her home to evaluate what we could do to fix the problem. He noticed that her support jacks were not supporting the floor above which was causing the sagging. We fixed the problem by installing a new supplemental beam with 3 SmartJacks. The support beam under the hallway which had the washer and dryer above was in good shape but the wood columns were splitting and moving because they did not have a solid footing under and could not support the weight. We installed 4 new SmartJacks with good footings under the existing beam. Her floors have now lifted about a 1/2 inch and as a result, was able to put in new floors!

James and Lynnece M. wanted to use their basement during the summer months but noticed a damp smell and water staining the walls.

As returning customers, they were excited to have us come back to their home. System Design Specialist, Calogeno Principato was able to identify multiple spots along the floors and walls where water was entering.

We directed the water down the walls behind our CleanSpace to our WaterGuard around the perimeter of their basement eventually dumping into our TripleSafe Pump System. Then we completely encapsulated the walls eliminating water vapor from evaporating into the air. This project used full height CleanSpace which added a lot of light reflecting surfaces which really brightened up the entire room!

Hank K.’s upper driveway was starting to sink causing a big bump to form and he would have to drive his car over that each time to pull into the garage. Hank was tired of the bump and wanted  level and stabilize the concrete.

After hearing great things about Thrasher,  he decided to give us a call. We had System Design Specialist, Miles Hodson go out and he was able come up with a solution. We started with applying  PolyLevel to lift the concrete making the bump less noticeable. We then applied NexusPro Joint Sealant to seal the joints in the driveway and up to the front porch. Hank was not only impressed with the quality of work but how the production crew was efficient and cleaned up well.