Thrasher Foundation Repair Before & After Photos

This Homeowner wanted to have their stamped concrete leveled to they would no longer have tripping hazards. 

we used PolyLevel to level the concrete to fix the tripping hazards. We then Sealed the joints and between the house and the concrete with NexasPro to prevent water from washing out the dirt again. 

Brock wanted the concrete raised around his home. He knew that the uneven slabs were tripping hazards, and didn't like the curb appeal of his concrete. The concrete was settling in different directions, which was caused by soil settlement over time. The joints of the concrete were also not sealed, allowing rain and moisture to penetrate beneath the concrete causing further settling and cracking. After the initial inspection, and proposal, Brock noticed more settling around the backside of his home. He was able to call our System Design Specialist, Brock, to talk about another solution to the new settlement in the back. 

For this project, PolyLevel foam was used. PolyLevel foam works better than mudjacking, as the foam compacts the soil beneath, while lifting the existing concrete slabs. NexusPro was then used to seal the joints, to prevent rain and moisture from getting under the concrete. All of our concrete projects are backed with a 5-year warranty. Brock can now rest easy that his concrete won't cause tripping hazards any longer. 

In the warmer months, The home would have a bad odor coming from crawl space. This was because there was no encapsulation that prevented the soil moisture from coming into the house from the access window that is in the basement causing mold to grow. 

We used CleanSpace Encapsulation to ensure that the soil moisture was under control, a SmartDrain to collect and disperse the collected water, and a SaniDry to improve the air quality of her home by lowering the air humidity and getting rid of the nasty smell she was dealing with.

The current supports for this home are cinder blocks that are breaking and offer little to no support as the floor began to fall down. They called Thrasher to come out to replace the old support structures with new. We used a smart jack 350 system to stabilize the home and lift the failing floor back up to its original position. 
 

This homeowner was annoyed with how many cracks there were in his driveway and walkway. He chose to use Thrasher to fix them because of our in-depth inspection and honesty. Matt Turner went to the home to inspect the concrete. He found that the concrete had settled due to the direction the water ran from at the top of the yard and his downspout was increasing water flow. 

To fix, we used our PolyLevel to lift, level, and stabilize the concrete in his driveway while sealing his control joints with NexusPro. Sealing the joints will prevent the water from getting under his concrete to help with further settlement. 

The customer was very happy with the end result and very grateful Thrasher was able to help.